STX Coilovers ST Suspensions SKODA Octavia III

The STX ST Suspensions coilovers (reference 1328000U#5) are derived from motorsport. They allow precise height adjustment, with a fixed damping setting factory-set.

• Vehicle: SKODA Octavia III (5E) RS, Sedan, Wagon, 2WD
• Years: 08/13-
• Maximum permitted front axle weight (kg): -1090
• Maximum permitted rear axle weight (kg): -1040
• Front lowering: 10-40 mm
• Rear lowering: 15-40 mm
• Height adjustment at the front and rear (where the vehicle allows) via a disc on the threaded body of the shock absorber
• Galvanization and anti-corrosion coating; struts in galvanized steel

The coilovers are supplied in sufficient quantity to equip the vehicle and fit in place of the original suspension, without modification. If the vehicle only has springs at the rear as standard, this will also be the case with these kits.

Only STXTA models are sold with strut mounts. For all other models, original strut mounts must be used for fitting. Kits are supplied bare (shock cartridges and springs where applicable), unless an accessory essential for lowering is required.

ST Suspensions is a KW brand, and products under this brand are manufactured by KW.

Technical notes before ordering:

• On models fitted with M-Tech, only use the lowering spring kits. Lowering will be 20 mm less than indicated.
• For models with a 55 mm strut diameter on the front axle.

For any further information, use the contact form.