MINI MINI (R60) Countryman 2.0 D Cooper SD (143 hp) remapping
- Fuel
- Diesel
- Years
- 2010 - 2016
- ECU
- Bosch EDC17C50
- Method
- Through the OBD port
Stage 1
MINI MINI (R60) Countryman 2.0 D Cooper SD (143 hp)
Power
+37 hp +26 %
Torque
+75 Nm +25 %
| Power | Torque | |
|---|---|---|
| Stock | 143 hp | 305 Nm |
| Stage 1 | 180 hp | 380 Nm |
| Gain | +37 hp | +75 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other MINI (R60) Countryman engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 1.6 One (98 hp) Petrol E85 compatible | 98 hp153 Nm | 130 hp175 Nm | +32 hp+22 Nm | |
| 1.6 T (163 hp) Petrol | 163 hp240 Nm | 189 hp320 Nm | +26 hp+80 Nm | |
| 1.6 Cooper S (184 hp) Petrol | 184 hp240 Nm | 210 hp320 Nm | +26 hp+80 Nm | |
| 1.6 Cooper S All4 (184 hp) Petrol | 184 hp240 Nm | 210 hp320 Nm | +26 hp+80 Nm | |
| 1.6 Cooper S JCW (211 / 218 hp) Petrol E85 compatible | 218 hp280 Nm | 238 hp340 Nm | +20 hp+60 Nm | |
| 1.6 D One (90 hp) Diesel | 90 hp215 Nm | 140 hp320 Nm | +50 hp+105 Nm | |
| 1.6 D Cooper (112 hp) Diesel | 112 hp270 Nm | 140 hp320 Nm | +28 hp+50 Nm | |
| 1.6 D Cooper All4 (112 hp) Diesel | 112 hp270 Nm | 140 hp320 Nm | +28 hp+50 Nm | |
| 2.0 D Cooper D (112 hp) Diesel | 112 hp270 Nm | 180 hp380 Nm | +68 hp+110 Nm | |
| 2.0 D Cooper SD (143 hp) Diesel | 143 hp305 Nm | 180 hp380 Nm | +37 hp+75 Nm | This page |
| 2.0 D Cooper SD All4 (143 hp) Diesel | 143 hp305 Nm | 180 hp380 Nm | +37 hp+75 Nm |
All MINI (R60) Countryman engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.