Mercedes Classe G 63 AMG (544 hp) remapping
- Fuel
- Petrol
- Years
- since 1989
- ECU
- Bosch MED17.7.3
- Method
- Through the OBD port
Stage 1
Mercedes Classe G 63 AMG (544 hp)
Power
+46 hp +8 %
Torque
+150 Nm +19 %
| Power | Torque | |
|---|---|---|
| Stock | 544 hp | 800 Nm |
| Stage 1 | 590 hp | 950 Nm |
| Gain | +46 hp | +150 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Classe G engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 500 EU6 (4.7T) (408 hp) Petrol | 408 hp600 Nm | 500 hp800 Nm | +92 hp+200 Nm | |
| 550 EU6 (4.0T) (416 hp) Petrol | 416 hp610 Nm | 500 hp720 Nm | +84 hp+110 Nm | |
| 63 AMG (544 hp) Petrol | 544 hp800 Nm | 590 hp950 Nm | +46 hp+150 Nm | This page |
| 63 AMG (5.5T) (571 hp) Petrol | 571 hp760 Nm | 650 hp1000 Nm | +79 hp+240 Nm | |
| 63 AMG (4.0T) (585 hp) Petrol | 585 hp850 Nm | 730 hp1100 Nm | +145 hp+250 Nm | |
| 65 AMG V12 (6.0T) (612 hp) Petrol | 612 hp1000 Nm | 680 hp1150 Nm | +68 hp+150 Nm | |
| 65 AMG V12 (6.0T) (630 hp) Petrol | 630 hp1000 Nm | 680 hp1150 Nm | +50 hp+150 Nm | |
| 350 BlueTec (3.0) (245 hp) Diesel | 245 hp600 Nm | 300 hp700 Nm | +55 hp+100 Nm |
All Classe G engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.