Mercedes Classe C (W205) 200 BlueTEC (1.6) (136 hp) remapping
- Fuel
- Diesel
- Years
- 2014 - 2021
- ECU
- Bosch EDC17C66
- Method
- Through the OBD port
Stage 1
Mercedes Classe C (W205) 200 BlueTEC (1.6) (136 hp)
Power
+19 hp +14 %
Torque
+30 Nm +9 %
| Power | Torque | |
|---|---|---|
| Stock | 136 hp | 320 Nm |
| Stage 1 | 155 hp | 350 Nm |
| Gain | +19 hp | +30 Nm |
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other Classe C (W205) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 160 (129 hp) Petrol E85 compatible | 129 hp210 Nm | 180 hp300 Nm | +51 hp+90 Nm | |
| 180 (156 hp) Petrol E85 compatible | 156 hp250 Nm | 175 hp300 Nm | +19 hp+50 Nm | |
| 200 (184 hp) Petrol E85 compatible | 184 hp270 Nm | 245 hp400 Nm | +61 hp+130 Nm | |
| 250 (211 hp) Petrol E85 compatible | 211 hp350 Nm | 245 hp400 Nm | +34 hp+50 Nm | |
| 350e Plug-in Hybrid (211 hp) Hybrid E85 compatible | 211 hp350 Nm | 245 hp400 Nm | +34 hp+50 Nm | |
| 300 (245 hp) Petrol | 245 hp370 Nm | 265 hp420 Nm | +20 hp+50 Nm | |
| 300 EU6 (2.0T) (258 hp) Petrol | 258 hp370 Nm | 278 hp420 Nm | +20 hp+50 Nm | |
| 350e Hybrid (2.0) (279 hp) Hybrid | 279 hp600 Nm | 320 hp650 Nm | +41 hp+50 Nm | |
| 400 4-matic (333 hp) Petrol | 333 hp480 Nm | 400 hp580 Nm | +67 hp+100 Nm | |
| 43 AMG 4-matic (367 hp) Petrol | 367 hp520 Nm | 410 hp600 Nm | +43 hp+80 Nm | |
| 43 Kombi AMG 4-matic (367 hp) Petrol | 367 hp520 Nm | 410 hp600 Nm | +43 hp+80 Nm | |
| 450AMG (367 hp) Petrol | 367 hp520 Nm | 410 hp600 Nm | +43 hp+80 Nm | |
| 43 AMG (3.0T) (390 hp) Petrol | 390 hp520 Nm | 420 hp620 Nm | +30 hp+100 Nm | |
| 63 AMG (476 hp) Petrol | 476 hp650 Nm | 580 hp850 Nm | +104 hp+200 Nm | |
| 63 S AMG (510 hp) Petrol | 510 hp700 Nm | 600 hp850 Nm | +90 hp+150 Nm | |
| 180 BlueTEC (1.6) (116 hp) Diesel | 116 hp280 Nm | 155 hp350 Nm | +39 hp+70 Nm | |
| 200 BlueTEC (1.6) (136 hp) Diesel | 136 hp320 Nm | 155 hp350 Nm | +19 hp+30 Nm | This page |
| 250 BlueTEC (2.1) (204 hp) Diesel | 204 hp500 Nm | 225 hp550 Nm | +21 hp+50 Nm | |
| 300 BlueTEC Hybrid (2.1) (231 hp) Diesel | 231 hp540 Nm | 260 hp600 Nm | +29 hp+60 Nm |
All Classe C (W205) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.