Audi A5 (F5) 40 TFSI (2.0) (204 hp) remapping
- Fuel
- Petrol
- Years
- 2016 - 2024
- ECU
- Siemens/Continental Simos19.7 / Bosch MG1CS031
Stage 1
Audi A5 (F5) 40 TFSI (2.0) (204 hp)
Power
+41 hp +20 %
Torque
+110 Nm +34 %
| Power | Torque | |
|---|---|---|
| Stock | 204 hp | 320 Nm |
| Stage 1 | 245 hp | 430 Nm |
| Gain | +41 hp | +110 Nm |
E85 FlexFuel conversion
Audi A5 (F5) 40 TFSI (2.0) (204 hp)
Ethanol ECU tuning: a FlexFuel ECU map to run on E85 Superethanol, cheaper at the pump, with no add-on module.
This ECU tune adapts the engine to Superethanol, with no claimed power gain.
How the remap works
- You order for your vehicle Engine and VIN: the map is prepared for your ECU.
- You receive the REPROG dongle A Bluetooth box that plugs into the OBD port under the dashboard.
- The app saves the stock map With MyFlasher (iOS, Android), the dongle reads and keeps the factory map.
- You flash in a few minutes The Dynaparts map is loaded; going back to stock remains possible at any time.
Other A5 (F5) engines
| Engine | Stock | After remap | Gain | Details |
|---|---|---|---|---|
| 35 TFSI (2.0) (150 hp) Petrol E85 compatible | 150 hp270 Nm | 240 hp380 Nm | +90 hp+110 Nm | |
| 40 TFSI g-tron (170 hp) Petrol E85 compatible | 170 hp270 Nm | 200 hp400 Nm | +30 hp+130 Nm | |
| 40 TFSI (2.0) (190 hp) Petrol E85 compatible | 190 hp320 Nm | 300 hp420 Nm | +110 hp+100 Nm | |
| 40 TFSI (2.0) (204 hp) Petrol E85 compatible | 204 hp320 Nm | 245 hp430 Nm | +41 hp+110 Nm | This page |
| 45 TFSI (2.0) (245 hp) Petrol E85 compatible | 245 hp350 Nm | 295 hp470 Nm | +50 hp+120 Nm | |
| 2.0 TFSI (252 hp) Petrol E85 compatible | 252 hp370 Nm | 300 hp440 Nm | +48 hp+70 Nm | |
| 45 TFSI (2.0) MHEV (265 hp) Petrol E85 compatible | 265 hp370 Nm | 304 hp420 Nm | +39 hp+50 Nm | |
| 35 TDI (2.0) (150 hp) Diesel | 150 hp340 Nm | 185 hp400 Nm | +35 hp+60 Nm | |
| 35 TDI (2.0) (163 hp) Diesel | 163 hp380 Nm | 200 hp440 Nm | +37 hp+60 Nm | |
| 40 TDI (2.0) (190 hp) Diesel | 190 hp380 Nm | 225 hp460 Nm | +35 hp+80 Nm | |
| 40 TDI (2.0) (204 hp) Diesel | 204 hp400 Nm | 250 hp480 Nm | +46 hp+80 Nm | |
| 3.0 TDI EU6 (Quattro) (218 hp) Diesel | 218 hp500 Nm | 290 hp600 Nm | +72 hp+100 Nm | |
| 45 TDI (3.0) (231 hp) Diesel | 231 hp500 Nm | 340 hp720 Nm | +109 hp+220 Nm | |
| 50 TDI (3.0) (286 hp) Diesel | 286 hp620 Nm | 350 hp720 Nm | +64 hp+100 Nm |
All A5 (F5) engines Parts compatible with this vehicle
Frequently asked questions
How does a remap with the REPROG pack work?
You plug the REPROG by Dynaparts Bluetooth OBD dongle into the vehicle's OBD port and install the MyFlasher app (iOS or Android). The dongle reads and saves the stock map, then loads the Dynaparts map for your engine. Flashing takes a few minutes, with no dismantling.
Why give my vehicle's VIN?
The map is prepared for your engine and ECU. The VIN (field E of the registration document) lets us check the exact vehicle version before shipping.
Can I go back to the stock map?
Yes. The stock map is saved during the first read and can be restored at any time from the app, in a few minutes.
What is the difference between Stage 1 and the E85 pack?
Stage 1 optimises injection, ignition and boost management on the original fuel. The E85 pack installs a FlexFuel map to run on E85 bioethanol, cheaper at the pump, without an add-on box.
Are the stated gains guaranteed?
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.
Indicative figures measured on a stock vehicle in good maintenance condition: they may vary depending on engine condition, fuel and measurement conditions. ECU tuning changes the vehicle's specifications: remember to inform your insurer.